How To Make An Electronic (Electric) Quiz Board

How To Make An Electronic (Electric) Quiz Board


Hi I am Ilhan Valani, today I am going to show you how to make a electronic quiz board. The componenets used are 5 question banks with its answers, one scissor, one double sided tape, one buzzer, two crocodile clips, one hard cardboard, 10 screws with it nuts, one nine volts battery with its connector, and 5 wires of different sizes. Take cardboard,cover it with paper and make 5 holes on each side, then take the screw and fix it with the nut and do the same for all the holes I have fixed all the screws with its nuts. Now take the big wire and and cut it into five different sizes and strip both ends of the wires. Loose the screw and take one end of the wire and roll the wire around the screw and tight it. Do the same for all the screws. and then do the same for all the screws
and none have fixed all the wires on one test then take the other end of the wire
and fix it on the other side at randomly lose the screw roll around it and then cite it that fix the other end
of the wire on the other side at randomly then you have to match three
words one at the middle for the buzzer and two on the sides for the clip change
the buzzer and stick it with the sense there and then take the bad thing this double-sided take this live and put
it in the hole and now I’ll start correcting take the dead one of the
better to the dead wire of the value and connected then take the blue wire of the
buzzer to the black fire of the clip and connected then take the black wire of
the battery to the black wire of the clip and connected now stick all the
questions on one side all the questions are on solar system the first person
wire is connected to the safe second screw so stick the answer there and do
the same for all not a stick this planet is the known as the morning at the
evening shadow of Earth when I put this is all answer it does not burn but when
we put to the correct answer it makes sound now let’s start the other question
which planet is large enough for 66 earth the answer is wrong it won’t but what if
the answer is correct it would make strong and then the connect

81 thoughts on “How To Make An Electronic (Electric) Quiz Board

  1. Welcome to Electrical and Electronics Question and Answer, where you can ask questions and receive answers from other members of the community.
    http://eletricalandelectronics.com

  2. It's very useful I had done this electronic quiz board for my project but I had used bulb instead of buzzer

  3. I was trying ot figure out an easy way to make this project and I saw this one and knew that I wouldn’t have to spend much money if I did it this way. Thanks so much!!!

  4. Wow.At first I thought that this wouldn't work out and tried something else.But that did not work out.Then I tried this and it worked at my first attempt.Thank you for uploading such a fabulous video.Keep doing works like this

  5. but I am not able to get electronic clips
    can anyone tell me where to buy
    ya uski jgh kuch aur laga sake?

Leave a Reply

Your email address will not be published. Required fields are marked *